What To Do If Your Water Heater Suddenly Stops Working
Information HereHow do you actually feel in relation to Hot Water Heater Repair?
Many modern homes utilize an electric hot water heater for their furnace, as a result of its convenience and ease of use. Nevertheless, much like any other electric home appliances, troubles might emerge with its use, all of a sudden. It can be actually frustrating to wake up to a chilly shower instead of a hot one or having your bath with water that isn't hot enough or even too hot. Whatever the case might be, hot water heater troubles can be fairly aggravating. The good news is, we have actually made a checklist of feasible remedies to your hot water heater concerns. There are a variety of aspects that might trigger a number of these problems, maybe a concern with the power supply, the electrical heating element, or the thermostat. Prior to doing anything, guarantee you shut off the main power supply for safety. Whatever the trouble is, getting it taken care of should not posture way too much of a problem if you follow these actions:
Inspect Your Power Supply:
As basic as this might appear, it is very necessary. Without appropriate power, your water heater will not operate. So the first thing to do when your water all of a sudden stops working is to validate that it isn't a power issue. Check if the fuse is burnt out or the circuit breaker stumbled. If the breaker is the issue, merely turn it off and on once more. Replace any kind of damaged or worn-out fuse. Examine the home appliance with power after these changes to see if it's currently working.
Examine the Heating Element in the Hot Water Heater:
If it's not a power issue, then attempt checking out your burner if it is still working. Examine each of your heating elements to ensure the issue isn't with any of them. If any one of them is faulty, change that part and after that check whether the warm water is back on.
Check Your Thermostat:
If your hot water heater still isn't working or the water coming out isn't warm enough, you might need to examine the temperature setups on your upper thermostat. Make sure the circuit breaker is switched off prior to doing anything. Open the accessibility panel and press the red switch for temperature reset over the thermostat. This should assist warm the water. Turn the breaker back on and inspect if the trouble has been solved.
Call A Professional:
If after changing all damaged parts as well as resetting your temperature level, the water heater still isn't functioning, you may need to call an expert plumber for an expert point of view. The problem with your heating unit could be that the cold and hot faucets have actually been switched or it may be undersized for the quantity of warm water needed in your house. Whatever the instance may be, an expert plumber would certainly aid solve the issue.
Verdict
Hot water heater problems are not always significant. Many of them are due to minor concerns like a blown fuse or damaged heating element. Replacing the malfunctioning components need to do the trick. Nevertheless, if you are still not able to address the trouble, give a call to your nearest plumber to find to get it taken care of.
Common Reasons Why Your Hot Water Heater Isn’t Working
Water Gets Too Hot
Ouch! You wanted a hot shower, not boiling! If you have a newer model electric water heater, your water heater works with a thermostat (actually, two thermostats). If this thermostat has been jostled — or purposely reset — by someone in your home, the water flow will be much hotter than you expected.
FIX: Adjust the thermostat to a more moderate setting for producing hot water. Forty-nine degrees Celsius is recommended to prevent scalding.
Water Doesn’t Get Hot
This is the opposite of the previous problem, but it’s almost as bad. Your flow of hot water is merely lukewarm or even incoming cold water. Once again, an incorrect thermostat setting, or a faulty thermocouple in a gas water heater, could be to blame. Another explanation might be that there’s no power to the water heater (in the case of an electric heater) or the pilot light has gone out (if you have a gas unit).
FIX: Adjust your thermostat as necessary. If that doesn’t do the trick, check the power supply. Another possibility is the replacement of a damaged thermocouple in gas water heaters.
Leaking Water Heater
A leaking water heater (a sign may be low hot water pressure, or not enough hot water to shower) might be a reason to push the panic button… but first, take a few minutes to check where the leakage is coming from. Leaks near the top of the heater tend to indicate a problem with a valve, which won’t need a major repair. However, a leak from the water heater base is more serious.
FIX: You may need a qualified plumber to replace your drain valve or TPR (temperature pressure relief) valve. When your water heater is leaking from below, your plumber might be able to fix it if you call them soon enough. Otherwise, you will need to have a new water heater installed.
Noisy Water Heater
Sometimes your water heater might make some peculiar noises, loud enough to compete with your singing in the shower. Are these a cause for alarm? It depends on exactly what kind of sounds you are hearing. Sizzles and rumbles are both red flags, indicating a heavy sediment buildup in your hot water tank that might cause a breakdown in the near future. In addition, banging is a sign of a water hammer, which can lead to serious damage to your pipes.
FIX: To stop sizzling or rumbling, turn off the tank and have it flushed by a reliable plumbing company ASAP. Ask your plumber to install a water hammer arrestor to quiet down the banging and save the pipes.
Pilot Light Keeps Going Out
Many pilot lights go out once in a while, but when your water heater pilot light keeps going out continually, it’s a problem. And the chances are good that that problem stems from either a shortage of combustible air or a malfunctioning thermocouple.
FIX: Increase the air supply around your water heater by cleaning dust and lint off the appliance and clearing any clutter from the area around it. A bad thermocouple will require expert plumbing repair and is more than basic gas water heater troubleshooting.
Water Smells Bad
The water from your residential plumbing pipes should smell neutral. If it has a strong unpleasant odour, something’s wrong. To check whether your water heater is at fault, turn on a hot water faucet and let it run for a few minutes. And, yes, use your nose to determine exactly what you are smelling.
FIX: For a garlicky odour, relight the pilot light on your water tank. When you detect the scent of garbage, you’ll need a professional plumber to flush the hot water tank and possibly replace the anode rod. A strong smell of rotten eggs could signal a hazardous gas leak; turn off the gas supply if possible, get everyone out of your house, and make an emergency call to the gas company.
Water Looks Brown Or Rusted
The first thing to do is ask yourself, “Is the brown, rusty-looking water coming only from my hot water taps?” If the answer is yes, then most likely, either the anode rod or the water heater interior is starting to rust, especially if your hot water heater is nearing the end of its life expectancy. (A “no” answer means the issue does not originate from the hot water heater but rather from the water supply.)
FIX: Contact a plumber to inspect the water heater. If you catch the problem quickly enough, it might be fixable. Otherwise, you’ll need a water heater replacement. Consider installation of an efficient new tankless water heater.
https://www.huskyair.com/blog/hot-water-heater-isnt-working/
As an enthusiastic person who reads about What Would Cause My Electric Water Heater to Stop Working?, I imagined sharing that section was worth the trouble. Enjoyed reading our piece of writing? Please share it. Let someone else check it out. Thanks so much for your time spent reading it.
Additional Information